OpenEye R-Series Quick Start - Manual

R-SERIES | REMOTE CLIENT WORKSTATION
Quick Guide
This quick operation guide is a quick reference for users to install
and operate the R-Series and only provides basic information on
settings and operation. Before attempting to connect, configure
and operate your R-Series Remote Client Workstation, please
read the user manual thoroughly.
ABOUT THIS GUIDE
WARNING:
To reduce the risk of electrical shock or damage to the equipment
POWER
BOX CONTENTS
RADIUS PC
HDMI to DVI-D
ADAPTER
(2 included in 4 port model)
POWER CABLE
MOUSE KEYBOARD
REPAIR DISC /
SOFTWARE DISC
No. Item No. Item
1 VGA 10 Speaker out
2 DVI-D 11 Line in - Line level
3 Display port 12 RS-232
4 HDMI 13 DVI-I
5 USB 2.0 14 5.1 Surround sound
6 Network 15 HDMI
7 USB 3.0 16 VGA
8 Optical Output 17 Power
9 Mic in - Not used
CONNECTIONS
(OE-RWST2 Model Shown)
• Do not disable the power grounding plug. The
grounding plug is an important safetey feature.
• If the electrical plug you are using does not have a
ground plug receptacle, contact a licensed electri-
cian to have it replaced with a grounded electrical
outlet.
• Plug the power cord into a grounded electrical outlet
that is easily accessible at all times.
• Disconnect the power from the computer by unpug-
ging the power cord either from the electrical outlet
or from the computer.
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
Refer to the video recorder manual for instructions on configuring
the recorder for use with the RADIUS software.
CONNECTING TO A RECORDER
Viewing Video
1. Locate the recorder in the Connection list. If it is not vis-
ible, click the plus sign ( +) next to the DVR Group name to
expand the file tree.
2. Double-click the desired recorder icon, or right-click the icon,
and select Connect.
3. Click the plus sign next ( +) to the recorder icon to display the
connected camera icons.
4. Double-click the camera you want to view, or drag the
camera icon onto a box on the Live Display screen.
Moving Cameras
To change the position of a camera on the Live Display Screen,
click on the displayed video and dtrag to a new box.
Remove a Camera
To remove a camera from the Live Display Screen, right-click the
displayed video and select Close.
- or -
Right-click the camera icon in the
Connection list and select
Close Live.
1. On the Live screen, click Menu, and then click Settings.
2. Click DVR List Setup.
3. Select the recorder model type from the Model list.
4. Type a name to identify the recorder in the Server Name
field.
5. Type the IP Address of the recorder in the IP / URL field.
6. Select the Port the recorder uses to transfer data. The port
is specified in the Network Setup display on the recorder.
7. Type the User ID and Password of an authorized remote
user. This is the same information used by the recorder.
8. Type the name of a new group in the Group box, or click the
arrow to select a previously created group.
9. When you are finished, click Add, and then click Save and
Close.
ADDING A NEW RECORDER
RADIUS software allows you to create groups of cameras called
screens and customize the organization of the cameras. These
screens can be selected from the Screen list.
Each screen can contain up to 64 different cameras, and the
Screen Division buttons will affect only the selected screen,.
Screen names and configurations will not be available unless
Auto Load Settings (on Log on) and Auto Save Settings (on Log
off) options are selected on the General settings screen.
CREATING CUSTOM SCREENS
1. Add cameras to the Live Display.
2. Select the desired screen division option.
3. Click
Screen List in the shortcut list.
4. Right-click in the Screen list, and then click Add Group.
5. Type a name to identify the group.
Tip You must create or select a group before adding a new
screen.
6. Right-click the group name and select Add User Screen.
7. Type a name to identify the screen.
Use the default User ID and password for your initial login. After logging
in for the first time, change the admin password for the recorder and
remote software to establish user level security. See the Manual for
instructions.
LOGGING IN FOR THE FIRST TIME
User ID: administrator
Password:
31343AC
1. Connect the monitors to the appropriate ports. For four-port
models, you can connect up to two monitors to the video
card for a maximum of four monitors.
2. Right-click the Desktop and then click Screen Resolution.
3. Drag the icons for your monitors into the desired positions.
If all of your monitors are not displayed, click Detect. If you
need help determining the number assigned to each monitor,
click Identify and the number will display on the monitor.
4. In the Multiple Displays field, select Extend these dis-
plays.
5. Select the appropriate resolution for each monitor by select-
ing the monitor icon, and then selecting the Resolution.
6. When configuring the primary monitor, select the Make this
my main display check box.
CONNECTING MULTILPLE MONITORS
1. On the Live screen, click Menu, and then click Settings.
2. Click DVR List Setup.
3. Select the recorder to edit from the list.
4. Edit the necessary information.
5. When you have finished editing, click
Update.
6. When you are finished editing all of your recorders, click
Save and Close.
EDITING A RECORDER