OpenEye SaleGuard - Manual (Page 14)

14 33112AB
Every location shown in the Manage Locations window is a connection to a Collector. Once you have
entered the location, you can configure the Collector. If you have more than one Collector, you must repeat
the steps to add a location until all your locations have been added.
1. Click Application , and then click Manage Locations .
2. Click Add , and then complete the location information in the Edit Location window.
Name – The name of the Collector
Tip Use a name that you will recognize to identify the location of the Collector. This name will be
seen in the Dashboard and Risk Analysis tabs
Description – For informational purposes
Street Address – For informational purposes
Telephone – For informational purposes
Network Address – The IP address of the Collector
POS Control Port – The default port is 8886
Workgroup Username – This is the Microsoft Windows operating system account username of the
Collector
Workgroup Password – This is the Microsoft Windows operating system account password of the
Collector
3. Click OK and the location will appear in the list.
4. After a location is added to the SaleGuard Client, you can configure the Collector.