OnLine Power Signal Saver IPC - Manual (Page 69)

6002-1842 Rev A ECO# 8881
59
2.3.6.2 Unit Specifications:
Menu 1 below (Figure 33) lists the BBS2000’s specifications.
Procedure: At the main menu, type 1 and press Enter. The screen displays the unit specifications as
shown below. To return to the main menu, press Enter.
Unit Model BBS2000
The model name [1-Unit Specifications ]
Unit Freq 60 hertz Nominal operating frequency
Input Voltage 120 Volts Nominal Input voltage
Output Voltage 120 Volts Nominal output voltage
Output VA 2000 VA The output VA capacity
Battery Voltage 48 Volts Nominal battery voltage
Max Charge
Current
10 amps MAX charge capacity
EEPROM Version 4.1 EEPROM version of the BBS2000
Figure 33
Unit Specifications Menu
2.3.6.3 Input / Output Values
Menu 2 below (Figure 34) lists the actual measurements of various input / output parameters.
Procedure: At the main menu, type 2 and press Enter. The screen displays the unit
specifications as shown below. To return to the main menu, press Enter.
Figure 34
Input/Output Values Menu
{2-INPUT/OUTPUT VALUES}
INPUT:
Voltage 120 Volts The Input voltage
Freq. 60.1 Hertz The Input frequency
OUTPUT:
Voltage 120 Volts The Output voltage
Freq 60.1 Hertz The Output frequency
Power 0000 Watts The Output Power in Watts
BATTERY:
Temperature 25 °C The ambient temperature of the battery case as read via
attached temperature probe
Voltage 53.8 The Battery DC voltage
Evt/Timer
Inv Event
00012 The Number of Input Power Failure
Evt Timer 13 Hours 36 Minutes Total time that the battery was Discharged since
the last RESET