3 ethernet converter set-up, 4 hyperterminal set-up – OnLine Power Signal Saver IPC User Manual

Page 60

Text mode
Original mode

6002-1842 Rev A ECO# 8881

2.3.3 Ethernet Converter Set-up

Purpose: Describes how to set-up communication between a network or PC and BBS2000 using the
optional Ethernet card.

The optional Ethernet Card can be installed on BBS2000 to permit remote access to the system.

For the Ethernet Option Consult Online Power Sales at 1800-227-8899 or visit us at

http://www.onlinepower.com/

2.3.4 HyperTerminal Set-up

Purpose: Describes how to set up BBS2000 Com ports using Windows

HyperTerminal

program (see Figurers 20 to 27)

The following HyperTerminal setting is recommended for local or remote communication between the
BBS2000 and a PC. For this tutorial, Com 1 is used. Verify the designation of COM port, where RS-
232/USB cable to PC is connected such as COM1, COM2, etc.

Step 1: The path is Programs/ Accessories/Communications/HyperTerminal as shown on Figure 20.

Figure 20