OnLine Power Signal Saver IPC - Manual (Page 47)

6002-1842 Rev A ECO# 8881
37
2.2.9 LCD Menu Tree
Purpose: Shows the Menu Tree (Figure 11) for the LCD display screen.
TIP:
• The Alarm and Fault submenus alert the operator to a problem with the BBS2000. When the RED ALARM
LED is FLASHING or ON, press ENTER to go to the STATUS submenu and use the down arrow key until the
Alarm or Fault menu appears. Press ENTER and one of the Alarm or Fault conditions described in Section
2.2.14 or 2.2.15 appears on the LCD.
• The STATUS submenu provides measurements of important BBS2000 inputs, outputs, and other parameters
via the LCD (Section 2.2.10).
• The CONTROL submenu allows the operator to manage the BBS2000 (Section 2.2.11).
• To learn the value of a specific measurement when it appears on the LCD, press the ENTER button.
• To start a command when it appears on the LCD, press the ENTER button.
NOTE: See Section 2.2.16 for details on Event Log View under the Maintenance submenu.
Figure 11
LCD Menu Tree