Options (lonworks, btl certified bacnet), Field retrofit installation – Nortec BACnet User Manual
Page 18
BACnet & LONWORKS Supplemental Install Manual | 14
Options (Lonworks, BTL Certified BACnet)
Nortec offers additional protocol options that may be purchased if required. Both field and
factory installed versions are available and include Lonworks and BTL
®
(BACnet Testing Lab)
1
certified BACnet. See
for specific part numbers and details.
Table 6: Optional Factory Installed Part Numbers
Part
Number
Kit Name
Kit Description
2574194
Lonworks, NH-EL
Factory installed option for Echelon’s LonWorks
protocol
2574193
BACnet MSTP, BTL Certified, NH-EL
Factory installed option for BTL approved protocol for
BACnet MSTP
2574192
BACnet IP, BTL Certified, NH-EL
Factory installed option for BTL approved protocol for
BACnet IP
Table 7: Optional Field Install Part Numbers
Part
Number
Kit Name
Kit Description
2574197
Lonworks, NH-EL , Retrofit
Field install option for Echelon’s LonWorks protocol
2574196
BACnet MSTP, BTL , NH-EL Retrofit
Field install option for BTL approved protocol for BACnet
MSTP
2574195
BACnet IP, BTL, NH-EL Retrofit
Field install option for BTL approved protocol for BACnet
IP
Field Retrofit Installation
The kits consist of a single interface card that is mounted on the rear side of the integrated
controller. Care should be taken with installation the optional unit in the field. Users will need to
install the interface card onto the pins as shown in
Figure 8: BACnet Specific Port
and
Figure 9: LonWorks Specific Port
location of each port for the respective protocol.
1
BTL is a registered trademark of BACnet International (BI)