Montigo H34DL - Manual (Page 13)

H-Series DL Gas Fireplace
Page 13
XG0140 - 070714
Installation
Figure 14. Top Vented, wall mounted installation with one 90° bend. The vent
run must comply with Venting Graph for Top vent, wall mounted terminations,
Figure 11, 11a, 12, 12a, or 13.
Figure 14a. Top Vented, wall mounted Multi-elbow installation. See Venting
Graph for Top vent, wall mounted terminations, Figure 11, 11a, 12, 12a, or 13.
WARNING:
An inspection of the explosion relief flappers and door
MUST be made prior to lighting the fireplace. Faulty seal
on the door gasket and/or explosion ports will result in
products of combustion leaking into the living space and
may result in carbon monoxide poisoning.
Solid Section
Flex Section
Hearth
150” Max.
Heat
Shield
Termination
Exterior
Wall
Figure 14b. Top Vented, wall mounted Retracted Multi-elbow installation. See
Venting Graph for Top vent, wall mounted terminations, Figure 11, 11a, 12,
12a, or 13.
Figure 13 H42DL* Top Vent Venting Graph for wall mounted terminations,
See Figures 14, 14a, or 14b.
36”
45”
Unacceptable vent run
within shaded area.
A
C
B
Acceptable vent run
within non-shaded area.
If your installation does not fall
within the venting graph parameters,
please contact a local Montigo
dealer for Power Venting options.
Heat
Shield
Termination
Hearth
Exterior
Wall
Flex or Rigid
section
38"Min. H34DL*
42"Min. H38DL*
45"Min. H42DL*
Max. as per graph
Flex Section
Exterior
wall
Solid Section
Termination
Hearth
30” Max.
126” Max.
Heat
Shield