beautypg.com

Montigo HFK50 User Manual

Caution, Installing the hfk50 fan kit for proflame 2, This kit should be installed by a qualified person

background image

Fan Kit

Installing the HFK50 Fan Kit for Proflame 2

Page 1

XT0014 - 092214

This kit should be installed by a qualified person.

Check local codes and read all instructions prior to installation.

Ensure that all power to the appliance is off at the electrical breaker or fuse

before beginning installation. Ensure gas is turned off at the shutoff valve before

beginning installation.

CAUTION

For use with:

H*34-DF/DL; L38-DF
H*38-DF/DL; L42-DF
H*-DF/DL; L52-DF

* = C, L, P, R, W

General Information

This blower kit is for installation with the models listed above.

Installation

1. Remove burner tray if required (follow instructions in the fireplace

installation manual).

®

C

US

Before You Begin

Ensure that the power supply has been turned off at the breaker or

fuse before beginning the installation.
Shut off the gas supply at the shut-off valve, and ensure that the main

burner and pilot light have been turned off and the fireplace has been

cooled off for at least two hours be fore installation.

KIT #

Contents

HFK50

2x blowers, 1x fan cord assembly with heat sensor

switch, Fan Speed Controller with Dual Receptacle

(DRB001), 4x mounting screws, Velcro strips,

self-adhesive cable tie mounts and cable ties.

Burner Tray Gasket

17

Figure 1

Contents of HFK50 Fan Kit package.

18

Burner Tray Gasket

Figure 2

Removing the burner tray (L38DF, L42DF, L52DF

models only).

Figure 3

Removing the burner tray (L38DF, L42DF, L52DF

models only).

Left fan

Right fan

Dual Recep-

tacle control box

(DRB001)

Fan Harness Power Cord

with heat sensor

Cable ties &

mounts

Fan mount-

ing screws