Overview, Items required for scale installation – MicroE PurePrecision User Manual
Page 4
Page 4
Overview
This manual applies to the installation of the following scale types.
•
PurePrecision Marker Tape II for OPS Series, Model HPMT-
•
PurePrecision Laser Tape II for OPS Series, Model HPTS-
•
PurePrecision Performance and Value Linear Glass Scales
for OPS Series, Model - PVGL-T (adhesive backed)
•
PurePrecision Rotory Glass Scales OPS Series, Model - RXXXX
Items Required for PurePrecision Scale Installation
You will need the following items available:
•
Shears (recommend, Clauss, Item# 18003)
1
•
Tape Applicator Tool, for applications >300mm (not required for installations <300mm)
1
OPS Side Mount Configuration tool Model Number: TSAT-SM-PPT
OPS Top Mount Configuration tool Model Number: TSAT-PPT
•
Finger Cots or talc-free gloves
1
,
2
•
Acetone or isopropyl alcohol
1
,
2
•
Lint-free cotton cloths or wipes
1
,
2
•
Index and Limit Marker stick-on sheets or Strips
1
(optional, for Laser Tape II and Precision and Value Glass scales):
- Limit Marker Strips, Model Number: NRLMS
- Index Marker Strips, Model Number: NRIMS
•
End caps (optional)
1
•
Two-part epoxy (Tra-Con Tra-Bond 2116)
1
,
2
•
Stick and disposable surface for stirring epoxy
1
,
2
Refer to encoder model data sheets for detailed ordering guide and more information
about MicroE Part Numbers.
1
Items needed for PurePrecision Tape Scales
2
Items needed for Performance and Value Linear Glass Scales