MicroE PurePrecision - Manual (Page 17)

Page 17
Tape Scale, OPS Side Mount Configuration
Installation By Mounted Applicator Tool
9.
Move the tool in a steady motion to apply the tape scale.
Push the applicator tool in the direction of tape application. Be sure to pull the adhesive backer out of the way
while the applicator is in motion.
Pull adhesive backer away from
tape applicator, while moving the
applicator tool. Direction of motion of tape
applicator tool.
10.
Once the scale is applied to the mounting surface, and before the blue protective film is removed, it is
recommended that even pressure be applied over the entire tape scale length by sliding a glove or cot
protected finger across the scale. The applied pressure will ensure that the adhesive is evenly and
permanently set.