Tape scale, ops top mount configuration – MicroE PurePrecision User Manual
Page 22
Page 22
5.
Feed the adhesive backing into the applicator tool
Insert the backing film into the applicator tool.
Tape Scale, OPS Top Mount Configuration
Installation by Hand Grip Applicator Tool
6.
Tape Scale Insertion
Insert the tape scale (with blue protective film) under the dowel pin, into the entry slot as shown.
Feed tape scale into the applicator tool, until the end of the tape is past the front roller as shown.
6.4 Tape scale fed past front tool roller.
5.2 Adhesive backer exiting from backer slot.
5.1 Adhesive backer inserted into backer slot.
6.1 Dowel pin and entry slot.
6.2 Tape inserted.
6.3 Tape inserted with adhesive backing exiting.