Dukane Dual Servo Spin Welder 403570-01 - Manual (Page 16)

Dual Servo Spin Welder User’s Manual
Dukane Manual Part No. 403-570-01 Page 10
Plastics Health Notice
Before using any Dukane welding system, be sure
you are familiar with OSHA regulations from the
U.S. Department of Labor about the particular type of
plastic(s) you are using.
When plastic materials are being processed, some
of them may emit fumes and/or vapors that could be
hazardous (e.g. PVC – Polyvinyl Chloride can emit
chlorine gas under certain processing conditions). Make
sure you use proper ventilation whenever these plastics
are processed.
Run Switches
The dual finger run switches comply with OSHA safety
regulations. Using a foot switch in place of the dual
finger run switches violates OSHA regulations.
General Safety
Before performing any maintenance or service on the Dual
Servo Spin Welder, locks and tags should be applied to
all energy isolating switches. Anything that might restore
energy to the welder must be locked out.
You may be required to add accessories to bring the
system into compliance with applicable regulations for
operator safety. In the United Sates, these regulations
are administered by OSHA.