Dukane Dual Servo Spin Welder 403570-01 - Manual (Page 10)

Dukane Manual Part No. 403-570-01 Page 4
Dual Servo Spin Welder User’s Manual
The Dual Servo Spin Welder excels at frictional
welding of assemblies and parts which require accurate
angular orientation and collapse distance. The parts can
be any shape and only the weld joint must be circular.
The welder uses two electric servos: a servo motor for
spinning the tool, and a servo actuator for moving the
machine head up and down. Both servos have high-
resolution encoders, enabling accurate process control.
Dukane offers three models: SVT012VR, SVT032VR,
and SVT042VR. Model differences are in the maximum
speed, power and torque of the spin servo motor (the
same vertical servo actuator is used in each).
Model specifications:
SVT012VR
750 RPM, 4.2 HP, 47 ft-lb Torque Spin Motor
SVT032VR
3,000 RPM, 4.2 HP, 16 ft-lb Torque Spin Motor
SVT042VR
4,000 RPM, 2.5 HP, 10 ft-lb Torque Spin Motor
All models have a 5-inch stroke, a fixture throat depth
of 8-inches, and a vertical maximum thrust of 700
pounds. Both SVT032VR and SVT042VR models have
the same maximum vertical clearance of 21.3 inches
(541 mm) between the bottom of the tooling hub and
top of the mounting base. The SVT012VR model has a
clearance of 20.4 inches (518 mm).
The Dual Servo Spin Welders were designed to provide
a reliable, long, and economical service life and meet
the applicable CE regulations.
Dual Servo Spin Welder
Overview