Legrand IC5400 - Manual (Page 19)

Page 15
301 Fulling Mill Road, Suite G ©Copyright 2008 by On-Q/Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
E. Patio Options (Local Settings)
These options may be configured by the Integrator or homeowner from any Room Unit in the
house. The Patio Options are specific only to the selected Patio Unit. Select “Patio Options”
from the Settings screen (see Figure 30) and use the talk/select and arrow buttons to select
which Patio Unit you would like to configure (see Figure 31). The first setting “Status:” see
Figure 32) determines whether that Patio Unit is enabled (ON) or disabled (OFF). This is a
handy feature for disabling the Patio Unit at night or while you are away. The “Volume:” option
determines the default volume level at that particular Patio Unit. The “Chime Volume:” option
determines the default volume level of Door Tones played at that particular Patio Unit when
someone pushes the doorbell button on a Door Unit. The “All Call:” option (see Figure 33)
enables (YES) or disables (NO) the broadcast page ability from that Patio Unit. The “Monitor:”
option enables (YES) or disables (NO) the Monitor button on that particular Patio Unit. The
“Time Out:” option is used to determine how quickly the Patio Unit button backlights goes to
sleep after inactivity (1 minute – default, 5 minutes, or 10 minutes).
F. Installer
Setup
The Installer Setup options are separated from the User options, as they are either options that
are typically configured only at the time of system installation, or options that are used for
system update or reset. Select Installer Setup from the Settings screen (see Figure 34) to see
a list of all the Installer Setup options (see Figure 35).
The Reply Options and Door Options are both related to Door Units. The reason Door Unit
Reply Options is separated from Room/Patio Unit “Reply Options” (selected from the Settings
screen), is that the Door Unit does not have a display, and as such must be configured from a
Room Unit. One of the Installer Setup Reply Options selections is “disabled”, which means that
if that option is selected, all Door Units will appear disabled, or broken.
SETTINGS
Reply Options
Unit Names
Room Options
Patio Options
Door Options
SETTINGS
Reply Options
Unit Names
Room Options
Patio Options
Door Options
Figure 30
PATIO OPTIONS PATIO OPTIONS
Select Unit:
PATIO1
BACK
PATIO OPTIONS PATIO OPTIONS
Select Unit:
PATIO1
BACK
PATIO OPTIONS PATIO OPTIONS
Status:
ON
Volume:
Chime Volume:
PATIO OPTIONS PATIO OPTIONS
Status:
ON
Volume:
Chime Volume:
PATIO OPTIONS PATIO1
All Call: YES
Monitor:
Time Out:
NO
1 Min
Chime Volume:
BACK
PATIO OPTIONS PATIO1
All Call: YES
Monitor:
Time Out:
NO
1 Min
Chime Volume:
BACK
Figure 31 Figure 32 Figure 33
SETTINGS
Reply Options
Installer Setup
Room Options
Patio Options
Door Options
SETTINGS
Reply Options
Installer Setup
Room Options
Patio Options
Door Options
ROOM1 INSTALLER SETUP
Door Options
Firmware Info
System Reset
Room Options
Disc. Settings
Reply Options
ROOM1 INSTALLER SETUP
Door Options
Firmware Info
System Reset
Room Options
Disc. Settings
Reply Options
Figure 34 Figure 35