Legrand MRP6 - Manual

AdvAnced OperAtiOn
Groups
Use a Miro Wireless Plug-In Lamp Module in conjunction with MRD8 Wireless
Multilocation Controllers to control one plug-in lamp outlet from multiple
locations. Binding the lamp module and MRD8 devices together in the same
Group lets you operate the lamp module from any of the control locations.
You can include other Miro wireless devices in the Group. All devices in the
Group operate when one member operates. If, for example, you increase the
brightness on one device in the Group, all devices will increase brightness.
Set the House ID (see Set House ID) before setting up Groups.
1. Go to any device that you want to include in the Group. Press . The device
LED flashes yellow, and all other devices in the House flash green. You now
have 5 minutes to complete this process.
2. To include or exclude a device in the Group press on the device until the
LED changes color. Yellow flashing LED = Included in the Group
Green flashing LED = NOT included in the Group
If you get to a device and it is NOT flashing, the 5 minute binding process
timer may have expired. Go back to step 1 and repeat.
3. Return to the device used in step 1 and press to terminate Group binding.
All LEDs revert to solid green. Now, all the devices in the Group control their
load circuit in exactly the same manner.
Adding a Module to a Group in an Existing System
1. Go to a device that is in the Group where you want to add the module.
Press . The device LED and all members of the Group flash yellow. The
new module flashes green.
2. Press on the new module until its LED flashes yellow.
3. Return to the device used in step 1 and press . All LEDs are solid green.
Deleting a Module from a Group in an Existing System
1. Go to a device other than the one you’re deleting that is in the existing
Group. Press until the LED flashes yellow on each member of the Group .
2. Press on the module you want to remove, until its LED flashes green.
3. Return to the device used in step 1 and press . All LEDs turn solid green.
Scene control
The Miro wireless plug-in lamp module may be easily incorporated into room
and whole house preset scenes. The Miro installation Guide provides more
information about configuring scenes and presets.
Instructions for installation and use are included with the relevant Miro
wireless room and whole house control devices. Application support
information and the Miro installation Guide is available online.