Legrand AU7001 - Manual

Installation Instructions
Catalog Number(s) Country of Origin: Made in China •
AU7001 Digital Audio Input Module
Doc. #1507203 08/14 Rev A
AU7001
1
INSTALLATION INSTRUCTIONS
Please read these instructions completely
before you begin.
PHYSICAL INSTALLATION
This device is verified to comply with Part 15 Class B of the FCC Rules.
The Digital Audio Input Module (AU7001) provides access to streaming music services and music files stored
on computes and storage devices connected to the homes network. Up to four (4) AU7001’s can be used in a
Digital Audio system. The AU7001 takes is powered by the AU7000 Digital Audio Distribution Module. The
AU7001 is setup by the Legrand Digital Audio app, available for iOS and Android devices, and controlled by
this app and through the Digital Audio Amplified Keypads.
Physical Installation: Install the AU7001 in the OnQ Enclosure. Connect a Cat 5
jumper from the “DIST MODULE SOURCEs (1-4) jack to one of the Source inputs of
the AU7000 Digital Audio Distribution Module. If jumpers are custom made
terminate Cat5 wires via TIA/EIA 568A. Connect Ethernet from the home network to
the LAN Jack. Ensure that all cables are connected to their respective locations.
Ensure that Keypads and sources located through the home are properly terminated
and correctly connected. Connect the a 12VCD power supply such as the PW7760
to the AU7000 and apply power.