beautypg.com

Setting up the cabinet – Legrand OR-GXC422942-A1-B User Manual

Page 15

background image

Setting Up the Cabinet

Ganging the Cabinets

Tools: 3/8 Drive Socket and Wrench

Hardware: ¼-20 Flange Hex Screws

(8 qty)

1. Position and level the adjacent cabinet.

The cabinets must be aligned both

vertically and front to back.

2. Locate 4 clearance holes in the

corner post on left side of the frame

(facing front or rear) inside the cabinet.

Insert screws into these holes and

fasten to pre-installed nuts on the

adjacent cabinet.

3. Bolt the cabinets together using

¼-20 x ¾” Long Flanged Hex screws

(8 total qty – 4 front & 4 rear).

¼-20 Flanged Hex

Screws (8 Pls)

14

Rev. 00 - 11/11

This manual is related to the following products: