Legrand RC7APTCGY - Manual (Page 3)

3
Step 10. Wire and snap communication Step 11. For cable pass-through or empty
jacks in adapters as shown. communication port, install foam
block in keystone adapter. Pass
cable through adapter adjacent
to foam plug. Close off non-utilized
Ortronics
® adapters with plastic
TracJack ® blank.
CAUTION: Empty communication ports must be closed off with foam
blocks or TracJack blanks to maintain fire classification.
NOTE: To maintain UL Fire Classification, all communication modules or blank inserts (factory or customer supplied) must be UL Listed
communication circuit accessories, and must fit securely in the supplied communication brackets with no visible openings between
the module and bracket. Supplied foam plugs must be used when passing cables through the communication openings.
Step 12. Snap communication jacks or Step 13. Align gasket over receptacle and press
communication port plugs into flange. bead into flange channel.
CAUTION: Gasket must be set in place to provide scrub water seal.
Keystone Ortronics Avaya
Foam Plug
TracJack Blank
TracJack Adapter
Keystone Adapter