Legrand EFB610-CTR - Manual

Evolution Series
Floor Box Terrazzo/Concrete Trim Ring
I N S T A L L A T I O N I N S T R U C T I O N S
Installation Instruction No.: 1 009 439R1 – Updated October 2011
Legrand/Wiremold electrical systems conform to and should be properly
grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire
hazard if improperly installed or used. Legrand/Wiremold electrical
products may bear the mark of a Nationally Recognized Testing
Laboratory (NRTL) and should be installed in conformance with current
local and/or the National Electrical Code.
IMPORTANT: Please read all instructions
before beginning.
PRODUCTS COVERED:
EFB610-CTR EFB610-TS
1. EFB610-CTR installation: place Evolution floor box
according to box installation instructions. Attach terrazzo
trim ring and terrazzo mudcap to the floor box with the
four provided screws as shown.
CONCRETE PRE-POUR ATTACHMENT METHOD:
Screws
Mudcap
Terrazzo Trim Ring
Box Assembly
for Concrete
Mudcap
Terrazzo Trim Ring
Box Assembly
1a. EFB610-CTR concrete pre-pour installation:
installation view of trim ring, mudcap, and floor box.
See Taping note below
NOTE: Taping of seams created between the trim
ring and box assembly will decrease the
ingress of concrete.
Mudcap Spacer