Legrand FITFIT Multi-Service Poke-Thru Device Abandonments - Manual (Page 3)

3
RC91GHBTC and RC92GHBTC: (Use RCAPFFTC)
Step 12: Disconnect electrical service from service fitting. Step 13: Remove side screws and top of service head.
NOTE: Includes 291 and 292 Pedestal Service Fitting.
Remove receptacles and communication
module. Remove cables.
Step 14: Remove four anchoring screws and base Step 15: Cut 6 1/2" [165mm] diameter hole in carpet
of service head. that is concentric with the cored hole.
NOTE: Use template provided on last page of instruction sheet.
Step 16: Attach abandonment plate with the Step 17: Completed installation.
four #6-32 screws provided.