K-Patents PR-03 User Manual
Page 95
95
95
95
95
8 Sensor specifications and other sensor information
89
8.7.4 PR-03-W mounting specifics
PR-03-W Saunders valve body flow cell can be mounted either vertically or horizontally. Special sensor
support is not needed as the valve body (piping) supports the sensor. Either way sensor cover should always
be horizontal to avoid sedimentation or gas/air pocket on the prism. Also installation after pump, before
valve and low installation point will reduce risk of air/gas pocket. Recommended flow velocity is 1.5–6m/s
(6–20ft/s).