K-Patents PR-23-SD Generation 1 - Manual (Page 12)

Document/Revision No. BP-EN-SDGEN1 1.0 Effective: April 1, 2013
12
Valve handle always
positioned at top
Widest bayonet lug
always positioned at top
Figure 9 Reassembling valve on vertical and horizontal pipes
● Make sure that the SDI valve handle and the largest bayonet connection are on top.
Otherwise, you will not be able to insert the sensor in its place.
● Tighten the bolts to a torque of 36 N-m (26 lb-ft) with an 8 mm (5/16”) allen key.
WARNING: Always shut the main steam valve before performing any work on the
wash nozzle.
To reinstall the wash nozzle
assembly
1. Insert the wash nozzle
assembly to its place ( 1)..
1