Installation information – D-Link DIR-120 User Manual
Page 6
DIR-120 Ethernet Broadband Router
D-Link DIR-120 User Manual
vi
Installation Information
Print this page and record the listed information here in case you have to re-configure your WAN connection in the future or reset the device configuration settings.
Information you will need from your Internet service provider:
Username
This is the Username that is used to log on to your Internet service
provider’s network. It is commonly in the form
Record your info
here.
Password
This is the Password that is used, in conjunction with the Username above,
to log on to your Internet provider’s network.
Internet Connection Type
This is the method that your ISP uses to send and receive data between the
Internet and your computer.
Information you will need about your DIR-120 Ethernet Broadband Router:
Username
This is the Username you will be prompted to enter when you access the
DIR-120 configuration screens using a Web browser. The default
Username is admin.
Record your info
here.
Password
This is the Password you will be prompted to enter when you access the
DIR-120’s configuration windows using a Web browser. There is no initial
Password.
LAN IP address for the DIR-120
This is the IP address you will enter into the Address field of your Web
browser to access the DIR-120’s configuration windows using a Web
Browser. The default IP address is 192.168.0.1.
LAN Subnet Mask for the DIR-120
This is the subnet mask used by the DIR-120, and will be used throughout
your LAN. The default subnet mask is 255.255.255.0.
Information you will need about your LAN or computer:
DHCP Client status
Your DIR-120 Broadband Router is configured, by default, to be a DHCP
server. This means that it can assign an IP address, subnet mask, and a
default gateway address to computers on your LAN. The range of IP
addresses the DIR-120 will assign are from 192.168.0.100 to
192.168.0.199. Your computer (or computers) needs to be configured to
Obtain an IP address automatically (that is, they need to be configured as
DHCP clients.)
Record your info
here.