D-Link DIR-120 User Manual

Page 32

DIR-120 Ethernet Broadband Router

Static IP Internet Connection

Your ISP should provide IP settings information needed for your public IP
address and other settings using the Static IP connection type.

After configuration of Internet and local network IP settings is complete, click
the Save Settings button to save the configuration changes made and reboot the
Router.

Static IP Internet Connection configuration menu

IP Address

Type in the public or global IP address provided by your ISP.

Subnet Mask

Type the Subnet Mask used for the public network interface.

ISP Gateway Address

Type the IP address of the gateway router (normally) owned by your ISP.

MAC Address /
Clone MAC Address

MAC Address - If you clone the MAC address of your computer to the Router, the MAC address will appear here. This will be
the MAC address presented to the ISP’s server when the connection is initiated.

Clone MAC Address - The default MAC address is set to the WAN’s physical interface MAC address on the Broadband
Router. You can use the “Clone MAC Address” button to copy the MAC address your computer’s Ethernet Card to the Router.

Primary DNS Address/
Secondary DNS Address

Type in the IP address of the primary DNS and secondary server.