D-Link DIR-120 - Manual (Page 39)

DIR-120 Ethernet Broadband Router
D-Link DIR-120 User Manual 33
L2TP
If your ISP is using L2TP to provide your Internet connection, the
ISP will give you the necessary information to configure the Router.
There are two ways to enable the router to become a L2TP client,
one is through assigning the router an IP address dynamically,
which means that the DHCP protocol will be implemented by the
Router to automatically configure the IP settings. The user may
input the IP settings manually by choosing the Static IP option
above the configuring area.
After configuration of Internet and local network IP settings is
complete, click the Save Settings button to save the configuration
changes made and reboot the Router.
BigPond Internet Connection configuration menu
User Name The user name supplied to you by your ISP.
Password The password supplied to you by your ISP.
Confirm Password Retype the password entered in the Password feld.
Auth Server Toggle the Authentication Server between sm-server and dce-server.
Login Server IP/Name Enter the IP address given to you by your ISP. This field is optional.
MAC Address This field requires the user to enter the Media Access Control (MAC) address of the Ethernet Card of your computer,
if instructed to do so by your ISP. To quickly accomplish this, click the Clone MAC Address button, which will
automatically copy the MAC address of your Ethernet card and enter it into the space provided, which will replace the
MAC address of the router.