D-Link DIR-120 - Manual (Page 14)

DIR-120 Ethernet Broadband Router
D-Link DIR-120 User Manual 8
Accessing the Configuration Manager
Now that your computer’s IP settings allow it to communicate with the Router, you can access the configuration software.
To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router.
Type in http:// followed by the default IP address, 192.168.0.1 in the address bar of the browser. The URL in the address
bar should read: http://192.168.0.1. Once entered, the user will be prompted to enter the username and password to access
the Configuration Manager, as show below. A new window will appear and you will be prompted for a user name and
password to access the web-based manager.
NOTE: The wrong proxy server settings on your browser can prevent connection to the web manager.
If you are having trouble connecting to the web interface of the Router, configure the proxy settings to
bypass the proxy server or disable use of proxy servers and try to connect again.
To check proxy setting for Windows Internet Explorer:
1. In Windows, click on the Start button, go to Settings and choose Control Panel.
2. In the Control Panel window, double-click on the Internet Options icon. (Alternatively you can access this Internet Options menu using the Tools pull-down menu in
Internet Explorer.)
3. Click the Connections tab and click on the LAN Settings button.
4. Verify that the “Use proxy server” option is NOT checked. If it is checked, click in the checked box to deselect the option and click OK.