D-Link DIR-120 User Manual

Page 22

DIR-120 Ethernet Broadband Router

PPPoE Connection Settings

Setup Wizard – Configure PPPoE Connection

For PPPoE connections, select the Address Mode Dynamic IP or Static IP, type in the
Username and Password used to identify and verify your account to the ISP. Retype the
password again and if necessary, type a Service Name or domain name. For Static IP address
mode, type the IP Address assigned to your account. Your ISP should provide this IP address
along with other account information. Click Next to continue.

Address Mode

This determines how an IP address is
assigned to the Internet connection.
Choose Dynamic IP if the PPPoE Internet
connection is assigned automatically (and
might change). Choose Static IP if the
PPPoE Internet connection is a single IP
address that will not change. The ISP
should give this IP address to you.

User Name

The PPPoE user name used to establish
the identity of your ISP account. Typically
this is in the form [email protected] -
some users may be allowed to select a
personalized user name for their account.

Password

Enter the password used to verify the
identity of your account. Your ISP may
have provided this to you or you might
have chosen a personalized password that
is easy to remember. The password is
case-sensitive, so type the characters
exactly as given to you.

Retype Password

Retype the password exactly as entered in
the previous field.

Service Name

Enter the Service Name provided by your
ISP if necessary (optional).