Motorola DP 2600 - Manual (Page 83)

English
73
Utilities
Turning the Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts (except for
the incoming Emergency alert tone) if needed.
Procedure:
Press the programmed All Tones/Alerts button to toggle all
tones on or off.
OR
Follow the procedure below.
1 c
to access the menu.
2 <
or
>
to Utilities and press
e
to select.
3 <
or
>
to Radio Settings and press
e
to select.
4 <
or
>
to Tones/Alerts and press
e
to select.
5 <
or
>
to All Tones and press
e
to select.
6 Press
e
to enable all tones. The display shows 9 beside
Enabled.
OR
Press
e
to disable all tones. The 9 disappears from beside
Enabled.
NOTE: At Step 5, you can also use
<
or
>
to change the
selected option.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
be higher or lower than the voice volume.
Procedure:
1 c
to access the menu.
2 <
or
>
to Utilities and press
e
to select.
3 <
or
>
to Radio Settings and press
e
to select.
4 <
or
>
to Tones/Alerts and press
e
to select.
5 <
or
>
to Vol. Offset and press
e
to select.
6 <
or
>
to the required volume value. The radio
sounds a feedback tone with each corresponding volume
value.
7 Press
e
to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
d
to exit without changing the current volume offset
settings.
LKP_EMEA.book Page 73 Wednesday, July 18, 2012 10:36 PM