Motorola DP 2600 - Manual (Page 79)

English
69
Password Lock Features
If enabled, this feature allows you to access your radio via
password upon powering up.
Accessing the Radio from Password
Procedure:
Power up the radio.
1 You will be prompt to enter a four-digit password.
2 Enter your current four-digit password. Press
<
or
>
to choose each digit’s numeric value (0-9). Press
>
or
c
to move to next digit. Each digit changes to
●
. Press
e
to confirm your selection.
You hear a positive indicator tone for every digit pressed.
Press
<
to remove the each
●
on the display.
3 If the password is correct:
Your radio proceeds to power up. See Powering Up the
Radio on page 5.
OR
If the password is incorrect:
The display shows Wrong Password. Repeat Step 2.
OR
After the third incorrect password, the display shows
Wrong Password and then, shows Radio Locked. A tone
sounds and the LED double blinks yellow.
Your radio enters into locked state for 15 minutes, and responds
to inputs from On/Off/Volume Control Knob and programmed
Backlight Auto button only.
NOTE: The radio is unable to receive any call, including
emergency calls, in locked state.
Unlocking the Radio from Locked State
Procedure:
Wait for 15 minutes. Repeat Steps 1 to 3 in Accessing the
Radio from Password on page 69.
OR
Power up the radio, if you have powered down the radio during
locked state:
1 A tone sounds and the LED double blinks yellow. The
display shows Radio Locked.
2 Wait for 15 minutes. Repeat Accessing the Radio from
Password on page 69.
Your radio restarts the 15 minutes timer for locked state when
you power up.
LKP_EMEA.book Page 69 Wednesday, July 18, 2012 10:36 PM