Motorola DP 2600 - Manual (Page 72)

English
62
Sending 5-Tone Message Encode to Contact
Procedure:
1 <
or
>
to Message and press
e
to select.
2 <
or
>
to Quick Text and press
e
to select.
3 <
or
>
to the required message. Press
e
to select.
4 <
or
>
to the required contact. Press
e
to select.
5 The display shows transitional mini notice, confirming your
message is being sent.
6 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Analog Status Update
Your radio is able to send preprogrammed messages from the
Status List indicating your current activity to a radio contact (for
5-Tone systems) or to the dispatcher (for MDC systems).
The last acknowledged message is kept at the top of the Status
List. The other messages are arranged in alphanumeric order.
Sending Status Update to Predefined Contact
Procedure:
1 <
or
>
to Status and press
e
to select.
2 <
or
>
to the required status. Press
e
to select.
3 <
or
>
to Set as Default. Press
e
to send the
status update.
4 The display shows transitional mini notice, confirming your
status update is being sent.
5 If the status update is acknowledged, a tone sounds and the
display shows positive mini notice. A 9 appears beside the
acknowledged status.
OR
If the status update is not acknowledged, a low tone sounds
and the display shows negative mini notice. A 9 remains
beside the previous status.
LKP_EMEA.book Page 62 Wednesday, July 18, 2012 10:36 PM