Kleenmaid KFL2000 - Manual (Page 29)

29
Troubleshooting Minor Faults
If repairs are needed, and assuming
that you cannot eliminate the fault
yourself with the aid the following
table.
q Turn the programme selector
toĂOff.
q Disconnect the washing machine
from the power supply.
q Turn off the tap.
q Call customer service
Fault Possible cause Remedial action
Washing machine door Without final spin" selected. Select Drain b or Spin B. g
cannot be opened.
Childproof lock activated. Deactivate childproof lock, see Page 23.
Power failure. An interrupted programme will be resumed when the
power returns. If the washing is to be removed during
the power failure, call customer service
Programme is running and/or washing machine door
is locked for safety reasons.
Wait until the programme ends; see Page 25.
Plug is loose or not plugged in. Eliminate cause.
Programme selector turned to Off before end of
programme.
Select a programme.
Washing machine door
cannot be opened even
Childproof lock activated. Deactivate childproof lock, see Page 23.
cannot be opened even
though the appliance has
been switched off and on
again.
The washing machine door is locked for safety
reasons because the water level, the temperature
orĂthe speed is too high.
See Topping up the washing/Interrupting the
programme", Page 24.
Programme continues
running even though the
appliance has been
switched off and on again.
Childproof lock activated. Deactivate childproof lock, see Page 23.
Appliance cannot be
operated. Child lock: on"
is indicated in the display
field.
Childproof lock activated. Deactivate childproof lock, see Page 23.
Control lights do not come A fuse has triggered. Switch on/replace the fuse. g
on.
gg
If the fault recurs, call Customer Service.
Power failure. An interrupted programme will be resumed when the
power returns. If the washing is to be removed during
the power failure, call customer service
Programme does not
start. Start/Pause M
indicator light flashes.
Start/Pause M button not pressed. Press the Start/Pause M button.
Programme does not
start
Door not closed properly. Check whether laundry is trapped in door.
start.
Door open?" indicated in
the display field.
Close the loading door (a click should be heard).
Programme continues.
Programme does not
start.
End time selected but still not activated by pressing the
Start/Pause M button.
Press the Start/Pause M button.