Kleenmaid KFL2000 - Manual (Page 24)

24
Set clock
You can set the current time.
TheĂsettings are retained even if your
washing machine is not used for up
to 6 weeks.
q Turn the programme selector to
the desired programme.
Example:
q Press the Menu button until
SetĂclock:" is displayed.
TheĂhour display flashes.
The Start/Pause M indicator light
flashes (red).
i The menu is left if a button is not
pressed within 10 seconds.
Changed settings are lost.
q Press the Select button until the
hour display is correct.
q Press the Menu button until the
minute display flashes.
The Start/Pause M indicator light
flashes (red).
q Press the Select button until the
minute display is correct.
The time is now set.
i Press the Menu button, the menu
function ends.
Other settings can be selected by
pressing the Menu button; the same
settings can be changed by pressing
the Select button.
During washing
Select a programme
again
q If the childproof lock is active,
deactivate temporarily.
See Page 23.
q Turn the programme selector
toĂOff.
q Turn the programme selector to
aĂnewly selected programme.
Start/Pause M indicator light
flashes.
q If required, change other settings.
See Page 21.
q If required, activate childproof
lock.
q Press the Start/Pause M button.
The programme starts.
The indicator light is on.
Topping up the washing/
Interrupting
the programme
You can put washing in the drum
later, take washing out of the drum
early or interrupt the programme at
any time.
i It is not recommended to top up
the washing after the wash phase
has started.
Without childproof lock
i You can top up or reduce
washing as long as the
Start/Pause M indicator light
isĂonĂ(red).
q Press the Start/Pause M button.
In the display field are indicated
inĂsuccession:
Pause",
Door can be opened".
q Open the door.
q Insert/remove washing.
q Close the door.