Kleenmaid KFL2000 - Manual (Page 22)

22
Wash
You can select among several wash
options:
These are:
- Mode: Normal Wash"
Usual wash duration.
- Mode: Quick Wash"
Reduced wash time for lightly
soiled washing.
- Mode: Intensive Wash" X
Extended wash time for heavily
soiled washing.
q Turn the programme selector
toĂthe desired programme.
q Load the laundry and close
theĂloading door.
The Start/Pause M indicator light
flashes (red).
Example:
q Press the Menu button until
Mode: Normal Wash" is
displayed.
The  " symbol flashes.
The Start/Pause M indicator light
flashes (red).
i The menu is left if a button is
notĂpressed within 10 seconds.
Changed settings are retained.
q Press Select button until the
required wash option is displayed.
i If Mode: Intensive Wash"
or Mode: Quick Wash" was
selected, symbol 
X " or  "
is permanently displayed when
the menu is left.
Other settings can be selected by
pressing the Menu button; the same
settings can be changed by pressing
the Select button.
q Press the Start/Pause M button.
The programme starts.
The indicator light is on.
i The individual programme steps
are indicated in the display field.
Signal
The acoustic signal indicates the start
or end of the programme, operating
errors or malfunctions.
You can specify the volume of the
acoustic signal.
Switching on, setting the
volume and switching off
theĂacoustic signal
q Turn the programme selector
toĂthe desired programme.
q Load the laundry and close
theĂloading door.
The Start/Pause M indicator light
flashes (red).
Example:
q Press the Menu button until
Signal: off" is displayed.
The  Z " symbol flashes.
The Start/Pause M indicator light
flashes (red).
i Ready" is displayed if the button
is not pressed for 10 seconds.
Changed settings are retained.
q Press the Select button until
Signal: continuous" is displayed.
If the Select button is held down,
the volume of the acoustic signal
is increased.
Release the Select button when
the required volume is reached.
q Hold down the Select button for
longer than 10 seconds, Signal:
max." is displayed.
q Switch off signal: after Signal:
max" was displayed, hold down
the Select button for longer than
10 seconds until Signal: off" is
displayed.
i The selected setting is retained
after the wash cycle.
Other settings can be selected by
pressing the Menu button; the same
settings can be changed by pressing
the Select button.