Kleenmaid KFL2000 - Manual (Page 18)

18
Indicator light in the
Start/Pause M button
The indicator light conveys the
following information:
- The Start/Pause M indicator light
flashes (red): Programme can be
started. Top up possible.
- The Start/Pause M control light
comes on (red): Programme is
running. The door is locked for
reasons of safety and cannot be
opened.
The door can be opened because the
Start/Pause M button was pressed.
i Exception:
When the childproof lock is
activated, the Start/Pause M
indicator light is off. At the end of
the programme the door remains
locked.
Special applications
Load adjust
Load adjust adjusts the water and
power consumption to each
programme - according to the
amount of laundry and type of textiles.
The auto load function is
aĂcomponent of your washing
machine and runs automatically.
This keeps the energy and water
consumption as low as possible.
The flow sensor measures the water
flow rate like an internal water gauge
and meters the exact volume of water
required by the amount of washing.
The stepless water level sensor
ensures the correct water level
required to wash your laundry in
eachĂprogramme.
Unbalanced load detection system
The automatic unbalanced load
detection system spins the laundry
several times to ensure even
distribution.
If the washing is very unevenly
distributed, it is not spun for reasons
of safety or the end speed is reduced.
In the u Wool U programmes the
spin cycle is attempted only twice in
order to prevent felting.
Time
When a programme has been
selected, the expected programme
duration is displayed.
Time deviations are caused by:
- load amount
- Multiple spinning if the laundry
isĂdistributed poorly in the drum.
- Additional rinse cycle if excessive
foam is in the laundry.
- too low water pressure
- Selection of an additional option,
e.g. Rinse Plus K, after the
programme has started,
As a result of this and other
properties, the wash time changes
accordingly.
i If no additional options were
selected and if no other changes
occur, the wash cycle will end at
the indicated time.