Kleenmaid KFL2000 - Manual (Page 21)

21
Spin speed
The speeds can be changed.
The maximum displayed spin speed
depends on the selected programme.
See also information on Page 17.
q Turn the programme selector
toĂthe desired programme.
q Load the laundry and close
theĂloading door.
The Start/Pause M indicator light
flashes (red).
Example:
q Press the Menu button until
SpinĂspeed" is displayed.
Current spin speed flashes.
The Start/Pause M indicator light
flashes (red).
i The menu is left if a button is not
pressed within 10 seconds.
Changed settings are lost.
q Press the Select button until the
desired spin speed or Without
final spin" is displayed.
Other settings can be selected by
pressing the Menu button; the same
settings can be changed by pressing
the Select button.
q Press the Start/Pause M button.
The programme starts.
The indicator light is on (red).
i The individual programme steps
are indicated in the display field.
Programme finished at
i Make sure that the time has been
set - see Set clock", Page 24 .
q Turn the programme selector
toĂthe desired programme.
q Load the laundry and close the
loading door.
The Start/Pause M indicator light
flashes (red).
Example:
q Press the Menu button until
Programme finished at" is
displayed.
Current end time flashes.
The Start/Pause M indicator
lightĂflashes (red).
i The menu is left if a button is
notĂpressed within 10 seconds.
Changed settings are retained.
q Press the Select button until the
programme end time is displayed.
The programme end can be set
inĂ30 minute steps.
The time can be programmed
upĂto a maximum 24 hours in
advance.
i The end time must be reset if the
programme, additional options or
the current time is changed.
If there is a small load of lightly
soiled washing, the programme
may end well before the selected
end time.
If there is a large load of heavily
soiled washing, the programme
may end several minutes after the
selected end time.
Other settings can be selected by
pressing the Menu button; the same
settings can be changed by pressing
the Select button.
q Press the Start/Pause M button.
The delayed start is activated.
The indicator light is on.
Time delay" is indicated in the
display field.