Hammer delay – Kawai CN35 Owner’s Manual User Manual
Page 97
97
Set
tings
2-7
Hammer Delay
When playing pianissimo passages using an acoustic piano, there may be a perceived delay between a key being
pressed and the hammer striking the strings.
If desired, the CN35 digital piano can recreate this delay, with the Hammer Delay setting allowing the delay length
to be adjusted.
* This Virtual Technician setting will affect acoustic piano sounds only.
1. Selecting the Hammer Delay setting
After entering the Virtual Technician menu (page 89):
Press the
d or c MENU buttons to select the Hammer Delay
setting.
2. Adjusting the Hammer Delay volume
Press the
d or c VALUE buttons to adjust the volume of the
Hammer Delay setting.
* The Hammer Delay volume can be adjusted within the range of Off, 1
- 10, with higher values resulting in an increased delay.
* Any changes made to the Hammer Delay setting will remain until the
power is turned off.
* Preferred Hammer Delay settings can be stored to a Registration
memory for convenient recall. Please refer to page 34 for more
information.
3. Exiting the Hammer Delay setting
Press the
d and c MENU buttons simultaneously to exit the
Hammer Delay setting and return to the main settings menu.
2-7 Hammer Delay
= 5
2-7 Hammer Delay
= 2
2-7 Hammer Delay
= 5