Creating a user touch curve, Touch, Touch = light – Kawai CN35 Owner’s Manual User Manual
Page 28: Pl ay ing the pi ano
28
Pl
ay
ing
the
Pi
ano
Touch
Selecting the touch sensitivity
Press and hold the TOUCH button, then press the d or c VALUE
buttons.
The selected touch curve will be shown in the LCD display.
Touch
= Light
Press the TOUCH button again to return to the standard (Normal)
touch setting.
* The touch setting is global for all of the preset sounds. It is not possible
to specify individual touch settings for each preset sound.
* Any changes made to the Touch settings will remain until the power
is turned off.
Creating a User Touch Curve
1. Entering User Touch Curve creation mode
After selecting a Touch Curve User1 or User2.
Press the REC button.
A message will be shown, prompting for the keyboard to be
played.
2. Creating the User Touch Curve
Play the piano dynamically from very soft to very loud, allowing
the instrument to examine the personal playing technique.
* More than one attempt may be required in order to create an accurate
User Touch Curve.
* Moving the master volume fader to the lowest position before
creating the User Touch Curve may help to reduce user distractions,
thus improving accuracy.
Press the PLAY/STOP button.
The new User Touch Curve will be stored to the ‘User1’ or ‘User2’
touch types, and selected automatically.
hold
hold
Start Playing
Soft Loud
Touch
= 6TFS1SFTT3&$
Start Playing
Soft Loud
Touch
= 6TFS1SFTT3&$
Touch analysis
complete.
Press PLAY/STOP
When finished
Touch analysis
complete.
Press PLAY/STOP
When finished
* Preferred Touch settings can be stored to a Registration memory for
convenient recall. Please refer to page 34 for more information.
* LIGHT and HEAVY do not represent the physical weight of the keys.
These are settings that affect the sensitivity of the keys, which
determines the volume level in response to the key movement.