Kawai CN35 Owner’s Manual - Manual (Page 104)

104
Set
tings
Virtual Technician
User Tuning
The User Tuning function allows each of the 88-keys to be tuned individually.
* This function is only effective when Stretch Tuning is set to On/Piano Only, Temperament is set to Equal Temperament, and Stretch Curve is set to
User 1~4.
1. Selecting the User Tuning memory
After selecting the Stretch Curve setting (page 103):
Press the d or c VALUE buttons to select one of the User Tuning
memories.
* Up to four different User Tuning memories can be created and stored.
Press the REC button.
The User Tuning screen will be shown in the LCD display.
2. Selecting the note, adjusting the user tuning value
Press the desired key to be tuned, then press the d or c VALUE
buttons to set the desired tuning value.
The desired key can also be selected by pressing the d or c
MENU buttons.
* The User Tuning value can be adjusted within the range of –50 - +50.
* Any changes made to the User Tuning setting will remain until the
power is turned off.
* Preferred User Tuning settings can be stored to a Registration memory
for convenient recall. Please refer to page 34 for more information.
3. Exiting the User Tuning function
Press the STOP button to exit the User Tuning setting and return
to the main settings menu.
* The User Tuning settings are saved automatically.
UserTuning A0
=0 “1SFTT4501
2-11 S.Curve
= 6TFS“1SFTT3&$
UserTuning C#2
=-4 “1SFTT4501
UserTuning A0
=0 “1SFTT4501