Kawai CN35 Owner’s Manual - Manual (Page 96)

96
Set
tings
Virtual Technician
2-6
Fall-back Noise
When playing an acoustic piano, it is often possible to hear the faint sound of the keyboard action returning (i.e.
‘falling back’) to the neutral position after a key is released.
The CN35 digital piano reproduces this sound, with the Fall-back Noise setting allowing the volume of this sound
to be adjusted.
* This Virtual Technician setting will affect acoustic piano sounds only.
1. Selecting the Fall-back Noise setting
After entering the Virtual Technician menu (page 89):
Press the d or c MENU buttons to select the Fall-back Noise
setting.
2. Adjusting the Fall-back Noise volume
Press the d or c VALUE buttons to adjust the volume of the
Fall-back Noise setting.
* The Fall-back Noise volume can be adjusted within the range of Off,
1 - 10, with higher values resulting in a louder effect.
* Any changes made to the Fall-back Noise setting will remain until the
power is turned off.
* Preferred Fall-back Noise settings can be stored to a Registration
memory for convenient recall. Please refer to page 34 for more
information.
3. Exiting the Fall-back Noise setting
Press the d and c MENU buttons simultaneously to exit the
Fall-back Noise setting and return to the main settings menu.
2-6 Fallback Ns.
= 5
2-6 Fallback Ns.
= Off
2-6 Fallback Ns.
= 5