Kawai CN35 Owner’s Manual - Manual (Page 71)

71
U
SB
Func
tions
5
Save Registration
The Save Registration function is used to save registration memories stored in the instrument to a USB memory
device. There are two types of registration file: ‘Single’ and ‘All’.
„
Registration file types
Registration type Description File extension
Single A file containing a single registration memory. KM6
All A file containing all 18 registration memories. KM3
1. Selecting the Save Regist function
Connect a USB memory device, then press the USB button to
enter the USB Menu.
Press the d or c MENU buttons then the VALUE c button to
select the Save Regist function.
The memory selection screen will be shown in the LCD display.
2. Selecting the registration memory to be saved
Press the d or c VALUE buttons to select the registration
memory to be saved.
* The ‘All’ option will save all registration memories to a single file.
Press the REC button to continue.
The filename entry screen will be shown in the LCD display.
3. Naming the registration file
Press the d or c VALUE buttons to cycle through the characters,
and the d or c MENU buttons to move the cursor.
* Save files are limited to a maximum name length of 11 characters.
* The saved registration will be stored in the root folder of the USB
memory device. It is not possible to store the file in a different folder.
4. Saving the registration file
Press the REC button again to save the recorded registration
with the specified filename.
A confirmation message will be shown in the LCD display.
Press the VALUE c button to confirm the save operation.
Press the PLAY/STOP button to to cancel the save operation.
Save Regist “3&$
= All
5 Save Regist
“1SFTT 7"-6&è
Save Regist “3&$
= »
Filename: “3&$
OneReg-000 KM6
Filename: “3&$
DonnyH. KM6
Completed.
Are you sure?
“1SFTT 7"-6&è