Kawai CN35 Owner’s Manual - Manual (Page 119)

119
Ap
pe
nd
ix
Connecting to Other Devices
The CN35 digital piano features a variety of jacks that allow the instrument to be connected to MIDI devices,
computers, speakers, and mixers. It is also possible to connect external audio sources, such as an MP3 player,
tablet, or a secondary keyboard, to the instrument’s amplifier and speaker system. The illustration below provides
a visual overview of the connectors and their typical applications.
Computer
Tablet
Connect the instrument to external
speakers, amplifiers, mixers, etc. Connect the instrument to MIDI modules,
other instruments/devices, etc.
Connect the instrument
to a computer or tablet to
send or receive MIDI data.
Connect the audio from
other devices to the
instrument’s speakers.
USB type ‘B’
USB type ‘A’
Before connecting the CN35 digital piano to other devices, ensure that the power to both the instrument and
the other device is turned off. If connections are established while the power is turned on, extraneous noise
that can damage the CN35 digital piano may activate the instrument’s amplifier protection circuit, preventing
any sound from being produced. If this occurs, turn the power off and then on again to reset the amplifier
protection circuit.
Do not connect the LINE IN and LINE OUT jacks of the CN35 digital piano together with the same cable. An audio
loop (oscillation sound) will occur, resulting in damage to the unit.