Kawai CN35 Owner’s Manual - Manual (Page 21)

21
Pl
ay
ing
the
Pi
ano
Split Mode
The Split Mode function divides the keyboard into two sections, allowing each section to be played with a different
sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
1. Entering Split mode
Press the SPLIT button.
The LED indicator for the SPLIT button will turn on to indicate
that Split mode is in use.
* The default split point is set between keys B3 and C4.
The LED indicator for the upper section sound button will turn
on, and the LED indicator for the lower section sound button
will start to flash. The respective sound names will also be
shown in the LCD display.
Lower section sound
Concert Grand
/Wood Bass
Upper section sound
Split
enabled
2. Changing the upper/lower section sounds
To select a different sound for the upper section:
Press the desired SOUND button.
Blues Organ
/Wood Bass
To select a different sound for the lower section:
Press and hold the SPLIT button, then press the desired SOUND
button.
Blues Organ
/W.Bass & Ride
* The Lower Octave Shift setting can be used to adjust the octave range
of the lower section. Please refer to page 111 for more information.
* The Lower Pedal setting can be used to enable/disable the damper pedal
for the lower section. Please refer to page 112 for more information.
* Preferred Split mode upper/lower sound combinations can be stored
to a Registration memory for convenient recall. Please refer to page
34 for more information.
Default Split mode:
The previously selected sound is used for the upper section,
and the ‘Wood Bass’ sound is selected for the lower section.
Default Split mode:
The previously selected sound is used for the upper section,
and the ‘Wood Bass’ sound is selected for the lower section.
×2
Example: To select the ‘Blues Organ’ sound for the upper
section, press the ORGAN button twice.
×2
Example: To select the ‘Blues Organ’ sound for the upper
section, press the ORGAN button twice.
hold ×3
Example: To select the ‘W. Bass & Ride’ sound for the lower
section, press and hold the SPLIT button, then press the
BASS button three times.
hold ×3
Example: To select the ‘W. Bass & Ride’ sound for the lower
section, press and hold the SPLIT button, then press the
BASS button three times.