Kawai CN35 Owner’s Manual - Manual (Page 67)

67
U
SB
Func
tions
1
Load Internal Song
The Load Internal Song function is used to load recorder songs stored on a USB memory device into the
instrument’s internal memory.
1. Selecting the Load Int. Song function
Connect a USB memory device, then press the USB button to
enter the USB Menu.
Press the d or c MENU buttons then the VALUE c button to
select the Load Int. Song function.
The file selection screen will be shown in the LCD display, listing
song files stored on the USB memory device.
* Please refer to page 53 for information about the file selection screen.
2. Selecting the song file to be loaded
Press the d or c VALUE buttons to move the selection cursor,
then press the MENU c button to select the song file.
The memory selection screen will be shown in the LCD display.
3. Selecting the song memory
Press the d or c VALUE buttons to select the internal song
memory for the song to be loaded into.
* If a song memory contains song data, a * symbol will be shown.
4. Loading the selected song
Press the REC button to load the selected song.
A confirmation message will be shown in the LCD display.
Press the VALUE c button to confirm the load operation.
Press the PLAY/STOP button to to cancel the load operation.
To play back the loaded song, please refer to the ‘Playing a Song’
instructions on page 48.
5. Exiting the Load Int. Song function
Press the USB button to exit the Load Int. Song function.
The LED indicator for the USB button will turn off, and the
instrument will return to normal playing mode.
1 Load Int. Song
“1SFTT 7"-6&è
‚Kendo Strut KSO
FnkyMiracle KSO
Recorder song
‚FnkyMiracle KSO
Simple Song KSO
Load to: “3&$
= Song1*
Contains song data
Completed.
Are you sure?
“1SFTT 7"-6&è