Kawai CN35 Owner’s Manual User Manual
Page 13
13
In
tr
oduc
tion
a
MASTER VOLUME slider
This slider controls the master volume level of the instrument’s
built-in speakers or headphones, if connected.
* This slider does not affect the LINE OUT level. For information about
adjusting the LINE OUT level, please refer to page 82.
b
CONCERT MAGIC button
This button is used to select the instrument's Concert Magic
function.
c
LESSON button
This button is used to select the instrument's built-in Lesson
songs.
* When pressed simultaneously, the CONCERT MAGIC and LESSON
buttons are also used to select the instrument’s Demo mode.
d
REGISTRATION button
This button is used to store and recall one of the 18 different
Registration memories. Each Registration can store sound, reverb/
effects settings, and various other panel and menu options.
e
SOUND buttons
These buttons are used to select the sound(s) that will be heard
when playing the instrument’s keyboard. These buttons are
also used to select Registration memories
f
MENU buttons
These buttons are used to navigate through the instrumnet’s
various function and settings menus.
g
LCD display
The LCD display provides important information relating to the
currently selected sound, function, and setting.
* A protective plastic film is attached to the display during production.
Please remove this film before attempting to play the instrument.
h
VALUE buttons
These buttons are used to adjust values, change settings, and
answer on-screen prompts.
i
EFFECTS and REVERB buttons
These buttons are used to turn the instrument’s reverb and
effects functions on/off, and to adjust effect/reverb settings.
j
BALANCE slider
This slider adjusts the volume balance of the two layered
sounds when Dual mode is selected, or the the upper and lower
sections when Split/Four Hands mode is selected.
k
SPLIT button
This button is used to enable the Split/Four Hands mode
functions, allowing the keyboard to be divided into upper and
lower sections.
l
METRONOME buttons
These buttons are used to turn the instrument’s metronome
function on/off, and to adjust metronome settings.
m
RESET button
This button is used to reset the instrument’s song recorder, and
to rewind songs and MP3/WAV/SMF files to the beginning.
n
REC and PLAY/STOP buttons
These buttons are used to record and playback songs stored in
the instrument’s internal memory, or MP3/WAV/SMF files saved
to a USB memory device.
o
REW and FF buttons
These buttons are used to move the playing position of the
current recorder song or MP3/WAV/SMF backward or forward.
These buttons are also used to select the recorder song.
p
LOOP button
This button is used to enable the instrument’s A-B Loop function,
allowing passages of a recorder song or MP3/WAV/SMF file to
be played back repeatedly.
q
USB button
This button is used to access the instrument’s USB functions.
r
TOUCH button
This button is used to access the instrument's Touch settings to
adjust the touch sensitivity of the keyboard.
s
TRANSPOSE button
This button is used to adjust the pitch of the keyboard in
semitone steps.
t
POWER switch
This switch is used to turn the instrument on/off.
* The CN35 digital piano features a power saving mode that can turn off
the instrument automatically after a specified period of inactivity. For
more information, please refer to the Auto Power Off setting on page
115.
u
PHONES jacks
These jacks are used to connect stereo headphones to the
instrument. Two pairs of headphones can be connected and
used simultaneously.
v
USB to Device port
This port is used to connect a FAT or FAT32 formatted USB
memory device to the instrument in order to load/save recorded
song data, registration memories, and MP3/WAV/SMF files etc.
w
LINE IN jacks
These jacks are used to connect the stereo output from audio
equipment, computers, or other electronic instruments to the
instrument's amplifier and speakers.
x
LINE OUT jacks
These jacks are used to connect the stereo output (Left/Right
1/4” phone plug) of the instrument to external amplifiers,
mixers, recording devices, and similar equipment.
y
USB to Host port
This port is use to connect the instrument to a computer using a
USB ‘B to A’ type cable in order to send and receive MIDI data.
z
MIDI jacks
The jacks are used to connect the instrument to external MIDI
devices (such as other musical instruments or a computer) in
order to send and receive MIDI data.