Split mode, Split point = f4, Jazz organ – Kawai CN35 Owner’s Manual User Manual
Page 22: Pl ay ing the pi ano, Changing the split point, Adjusting the upper/lower sound volume balance, Exiting split mode
22
Pl
ay
ing
the
Pi
ano
Split Mode
3. Changing the split point
Press and hold the SPLIT button, then press the desired split key
on the keyboard.
The name of the pressed key will briefly be shown in the LCD
display, and will become the new split point.
Split Point
= F4
Example: To set the split point to key F4, press and hold
the SPLIT button, then press the F4 key.
hold
Upper section
Lower section
New split point
4. Adjusting the upper/lower sound volume balance
Use the BALANCE slider to adjust the volume balance between
the upper and lower sections.
As the volume of the upper sound increases, the volume of the
lower sound decreases, and vice versa.
* The preferred Split mode upper/lower volume balance can also be
stored to a Registration memory for convenient recall. Please refer to
page 34 for more information.
5. Exiting Split mode
While Split mode is in use:
Press the SPLIT button.
The LED indicator for the SPLIT button will turn off, and the
instrument will return to normal (full keyboard) operation.
Jazz Organ
Increase
lower
sound
volume
Increase
upper
sound
volume
Increase
lower
sound
volume
Increase
upper
sound
volume