Ivoclar Vivadent IPS e.max CAD-on - Manual (Page 42)

42
Optional – Adjustments with IPS e.max CAD Crystall./Add-On
If adjustments of the shade or shape or corrections at the fusion joint of IPS e.max CAD-on restorations are necessary,
three IPS e.max Crystall./Add-On materials are available.
Procedure for the application of the IPS e.max CAD Crystall./Add-On materials on the fused, crystallized
IPS e.max CAD restoration
– Mix IPS e.max CAD Crystall/Add-On Connect with IPS e.max CAD Crystall/Add-On Liquid longlife to obtain a
creamy consistency which turns flowable when vibrated.
– Apply the IPS e.max CAD Crystall./Add-On Connect material to the area of the fusion joint of the crystallized restora-
tion to be corrected while using the vibrator (Ivomix).
– To mix the IPS e.max CAD Crystall./Add-On Incisal and Dentin, the IPS e.max CAD Crystall./Add-On Liquid all-
round is used. A material which offers a stable consistency and which can be layered is thus obtained. Apply the
mixed Add-On materials to the area to be corrected.
– If required, additionally apply IPS e.max CAD Crystall./Glaze, Shades and Stains to the crystallized restoration.
Characterizations can also be applied on the IPS e.max CAD Crystall./Add-On Connect material.
– Conduct the corrective firing on the IPS e.max CAD Crystallization Tray.
For the IPS e.max CAD-on Corrective firing, the firing parameters of the "IPS e.max CAD-on technique
Characterization/Glaze firing" (p. 41 and 51) must be used.
Mix IPS e.max CAD
Crystall./Add-On ....
... for adjustments
... with IPS e.max CAD
Crystall./...
Application on the
fused, crystallized
restoration
... Connect
... in the fusion area
... Add-On Liquid
longlife
Correction at the fusion joint with vibration
with Ivomix
... Incisal
... in the incisal area
... Add-On Liquid
allround
Correction of proximal contact
... Dentin
... in the dentin area or the
basal area of the pontic
... Add-On Liquid
allround
Circular or basal correction