Ivoclar Vivadent IPS e.max CAD Abutment Solutions - Manual (Page 62)

62
Material Selection Table
Desir
ed tooth shade
Bleach BL and A-D Shade Guide
BL1
BL2
BL3
BL4
A1
A2
A3
A3.5
A4
B1
B2
B3
B4
C1
C2
C3
C4
D2
D3
D4
Material combination
to achieve the tooth shade
Ti base
Extraoral cementation IPS e.max CAD abutment / Ti base
Multilink Hybrid Abutment HO 0*
IPS e.max CAD ceramic structur
e
MO 0
MO 1
MO 2
MO 3
MO 1
MO 3
MO 1
MO 4
MO 3
Intraoral cementation Cr
own on
hybrid abutment
Adhesive, self-adhesive or conventional cementation,
e.g. SpeedCEM
IPS e.max CAD cr
own
LT
BL1
LT
BL2
LT
BL3
LT
BL4
LT A1
LT A2
LT A3
LT
A3.5
LT A4
LT B1
LT B2
LT B3
LT B4
LT C1
LT C2
LT C3
LT C4
LT D2
LT D3
LT D4
*
T
he r
ange of products may v
ary from country to country
.
Desir
ed tooth shade
Bleach BL and A-D Shade Guide
BL1
BL2
BL3
BL4
A1
A2
A3
A3.5
A4
B1
B2
B3
B4
C1
C2
C3
C4
D2
D3
D4
Material combination
to achieve the tooth
shade
Ti base
Extraoral cementation IPS e.max CAD abutment cr
own / T
i base
Multilink Hybrid Abutment HO 0*
IPS e.max CAD ceramic structur
e
LT
BL1
1
LT
BL2
LT
BL3
1
LT
BL4
1
LT A1
LT A2
LT A3
LT
A3.5
LT
A4
1
LT B1
LT B2
LT
B3
1
LT
B4
1
LT C1
LT C2
LT
C3
1
LT
C4
1
LT D2
LT
D3
1
LT
D4
1
*
T
he r
ange of products may v
ary from country to country
.
1
IPS e
.max CAD L
T Blocks are av
ailable in 10 shades
. T
o create the desired tooth shade
, select the closest block shade in the respective shade group and determine the restor
ation shade by means of Stains
.
IPS e.max CAD hybrid abutment and IPS e.max CAD dedicated cr
own
The material is selected on the basis of the desir
ed tooth shade (Bleach BL or A–D). Depending on the geometry of the hybrid abutment and the cr
own, shade adjustment by
means of characterization with IPS e.max CAD Crystall./Shades, Stains, or IPS e.mx Ceram Shades and Essences may be necessary
to achieve the desir
ed shade.
The block r
ecommendations for the hybrid abutment have been selected in such a way that the desir
ed tooth shade is achieved in combination with the cr
own. In the "cervi
-
cal ar
ea", it may be necessary to characterize the hybrid abutment accor
ding to the clinical situation.
IPS e.max CAD hybrid abutment cr
own
The material is selected on the basis of the desir
ed tooth shade (Bleach BL or A–D). Depending on the geometry of the hybrid abutment cr
own, shade adjustment by means of
characterization with IPS e.max CAD Crystall./Shades, Stains, or IPS e.mx Ceram Shades and Essences may be necessary to
achieve the desir
ed shade. In the "cervical ar
ea", it
may be necessary to characterize the hybrid abutment cr
own accor
ding to the clinical situation.