Ivoclar Vivadent IPS e.max CAD Abutment Solutions User Manual
Page 47
47
Application Procedure
– Permanent Cementation
The Ti base is screwed on the model analog. The relative position to the ceramic
structure is marked with a waterproof pen.
The bonding surface can be carefully blasted according to the instructions of the
manufacturer.
E.g. silicone (Virtual Extra Light Body Fast Set) is applied in order to protect the
emergence profile and the screw channel.
Removal of the silicone and subsequently cleaning with ultrasound in a water bath
or with the steam jet.
Monobond Plus is applied to the clean bonding surface and allowed to react for
60 s. After the reaction time, any remaining residue is dried with blown air that is
free of water and oil.
The screw channel is sealed with a foam pellet or wax.
The bonding surface must not be contaminated in the process.
- 14K (2 pages)
- 24K (2 pages)
- BioUniversal KFG (2 pages)
- Callisto 86 (2 pages)
- Capricorn 15 (2 pages)
- Callisto 86 (2 pages)
- Harmony KF (2 pages)
- BioUniversal KFG (2 pages)
- BioUniversal KFG (2 pages)
- BioUniversal E (2 pages)
- BioUniversal PdF (2 pages)
- Brite Gold (2 pages)
- Capricorn 15 (2 pages)
- Callisto Implant 33 (2 pages)
- Capricorn (2 pages)
- Colado CC (2 pages)
- Callisto 84 (2 pages)
- Callisto CP+ (2 pages)
- Callisto CPG (2 pages)
- Callisto Implant 60 (2 pages)
- CosmoPost (24 pages)
- Colado NC (2 pages)
- Elektra (2 pages)
- Evolution Lite (2 pages)
- ESPRIT (1 page)
- Elektra 10 (2 pages)
- IPS d.SIGN Ultra (2 pages)
- EP 5000 (1 page)
- Harmony 2 (2 pages)
- EP 600 (36 pages)
- Harmony Hard (2 pages)
- Harmony Medium (2 pages)
- Harmony Soft (2 pages)
- Heliobond (36 pages)
- Harmony 3 (2 pages)
- Harmony C&B 55 (2 pages)
- EP 600 Combi (40 pages)
- Harmony PF (2 pages)
- Harmony X-Hard (2 pages)
- IPS AcrylCAD (2 pages)
- IPS d.SIGN 30 (2 pages)
- IPS Classic (24 pages)
- IPS d.SIGN 59 (2 pages)
- IPS d.SIGN 84 (2 pages)
- IPS d.SIGN 96 (2 pages)