Ivoclar Vivadent IPS e.max CAD Abutment Solutions - Manual (Page 2)

2
Table of Contents
3 IPS e.max System
4 IPS e.max CAD
5 Product Information
Description of IPS e.max CAD Abutment Solutions
Material
Scientific data
CAD/CAM partners
9 Fabrication of Hybrid Abutments and Hybrid Abutment Crowns
Treatment/Fabrication process
Shade – tooth shade and abutment shade
Preparation for the CAD/CAM process
Layer thicknesses of the ceramic components
Block selection
CAD/CAM processing
Finishing
17
Optional: Clinical Try-In
Temporarily securing the ceramic structure on the Ti base
Clinical try-in
22 Completing the IPS e.max CAD Ceramic Structure
Polishing technique
Staining technique on the "blue restoration"
Staining technique on the "tooth-coloured restoration"
44 Crowns on IPS e.max CAD Hybrid Abutments
46 Permanent Cementation Ti Base / Ceramic Structure
52
Seating and Aftercare
Sterilization
Intraoral preparation
Seating the hybrid abutment and separate crown
Seating the hybrid abutment crown
Care notes – Implant care
60 General Information
Frequently asked questions
Material selection table
Crystallization and firing parameters
Clinical cases