Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 90)

OperatiOn
3-2 MicroEDGE Pro Instruction Manual 807290
operating the CNC
Phoenix software runs on the Hypertherm computer numerical controls (CNCs) including the EDGE ® Pro and
MicroEDGE ® Pro. Phoenix supports either a touch screen or LCD display with a USB-connected keyboard and mouse
for entering information and navigating the software. For more information, see the Phoenix Software Operator’s Manual.
For more information about the components of your cutting system that are supplied by your table manufacturer, refer to
the manuals supplied by the manufacturer
operator console
An optional operator console provided by an OEM or a system integrator powers up the CNC and controls machine
motion such as station selection, raising or lowering the cutting tool, and positioning the cutting tool before starting a
part program.
touch screen LCD
The Phoenix software is designed for touch screens with 1024 x 768 resolution and a 4:3 aspect ratio. When your CNC
is equipped with a touch screen, you can enter data into the software by touching the window controls and fields. Any
field that requires data input automatically displays an onscreen keypad when you touch it.
LCD display
The MicroEDGE Pro can support an LCD display and requires 1024 x 768 resolution with a 4:3 aspect ratio.